Ways to Treat Exposed Brick Walls at Home
The exposed brick wall of the house actually requires careful maintenance. Otherwise, the structure and appearance will be easily damaged, making it no longer attractive. In order not to be confused, you can apply the following tips for caring for exposed brick walls.
1. Apply a Coating Material to Protect the Surface
Not only cleaning it regularly, it’s a good idea to coat the walls with a coating.
This is important, especially if you have an exposed brick facade at home.
The coating will function as a waterproof and dirt-repellent coating, and give a shiny feel to the walls.
If you don’t want the shimmer of the coating to be too visible, just apply it lightly 1-2 times.
This will also make it easier for you to clean the walls in the future.
2. Use a Brush to Treat an Exposed Brick Wall
Exposed brick wall construction is not covered by acian.
Therefore, the surface texture is very rough and is easier to get dirty.
You have to brush it regularly so that dust and dirt do not accumulate on the surface of the brick.
However, make sure you don’t use a regular floor brush, but a small brush to sweep it gently.
The goal is that the surface of the exposed brick house wall is not damaged when it is cleaned.
3. Keep the Exposed Brick Wall Moisture
Exposed brick walls are more susceptible to damp environments than plaster or plaster walls.
Therefore, you must consider the placement of the walls carefully.
If what is built is an exposed brick facade, of course access to natural light is more secure.
But if you build it indoors, make sure the wall is facing an opening such as a glass window.
Do not build exposed brick walls in damp locations with poor ventilation.
4. Rub with Lemon Juice Mix
When doing daily maintenance, you don’t just need to sweep the surface with a brush.
But also use lemon juice to more effectively remove dirt on the walls.
Pour a tablespoon of lemon juice into a bucket of water, then dip the brush in it.
Then start scrubbing the surface of the wall with the brush.
Pay extra attention to the bottom of the wall, as this is where dirt and dust tend to accumulate.
When you’re done, make sure you dry the walls well.
5. Immediately eradicate the fungus and moss that grows on the surface of the wall
Not much different from natural stone, exposed brick is also susceptible to mold and mildew.
Usually this is caused by humid air conditions and mold seeds carried by the wind.
If you see early signs of mold and mildew, immediately eradicate it down to the roots.
You can use battery water for maximum results.